Alfa Laval Compabloc Compact Heat Exchanger Range

Alfa Laval Compabloc range is compact and designed for optimum performance and serviceability across a broad spectrum of industrial process applications. Standard pressure range up to 42 bar.

Application

The Alfa Laval Compabloc is a fully welded compact heat exchanger designed for the complete range of process and utility duties. The Compabloc range provides the most efficient, cost-effective, compact and cleanable heat exchanger solution available today. After 20 years on the market, Compabloc has shown itself to be the market leader in terms of life-cycle costs and energy savings.



Design

Alfa Laval designed the Compabloc range of welded heat exchangers with a focus on performance, compactness, and serviceability.

The heart of the Compabloc is a stack of corrugated heat transfer plates in 316L stainless steel, or other high-grade material. The plates are laser welded (models CP30 and above) and form a compact core. This core is then enclosed and supported by four corner girders, top and bottom heads and four side panels (see Sectional view of Compabloc). These components are bolted together and can be quickly taken apart for inspection, service and cleaning. The design can be configured in single or multi-pass  arrangements in either co-current or counter-current operation, for liquid-to-liquid or two-phase duties.

Comments

Post a Comment

Popular posts from this blog

Decanter Centrifuges for Wastewater Applications

Image
  Alfa Laval offers a complete range of  wastewater decanter  for sludge thickening and dewatering – from robust i-DW units to our state-of-the-art ALDEC G3 VecFlow™ systems. Alfa Laval ALDEC G3 VecFlow™ It is a state-of-the-art decanter for dewatering and thickening applications. It offers an ideal solution for duties where maximum separation performance, lowest possible power consumption, very high capacity and advanced control possibilities are required. ALDEC G3 VecFlow™ features the most advanced technology available on the market, including our unique VecFlow™ feed zone and Slimline conveyor. ALDEC G3 VecFlow™ is available with capacities from 23 to 230 m3/h. Benefits Highest performance at the lowest operating cost Extremely effective separation, 2% drier solids compared to standard decanters Lowest power consumption, 30% lower than standard decanters The lowest total cost of ownership Upgradeable PowerTubes, Slimline conveyor, Direct Drive gearbox, and VecFlow™ feed zone Replac
Read more

Bulker-fit configuration for Alfa Laval PureBallast 3 matches differentiated ballasting/deballasting flows

  Bulk carriers can now benefit from an Alfa Laval PureBallast 3 bulker-fit configuration, which is specifically adapted to their flow needs. The bulker-fit configuration offers savings in footprint, installation, OPEX, and especially CAPEX, yet it retains the high performance, easy operation, and global service coverage PureBallast 3 is known for. A growing number of ship owners are choosing UV ballast water treatment over electrochlorination, even for large ballast water flows. Today’s UV treatment competes easily on footprint and energy consumption, which makes advantages like chemical-free operation, zero corrosion risk, and efficiency at low salinities and temperatures even more attractive. Until now, however, the move towards UV has been less noticeable among bulkers. “Bulkers have a unique ballasting and deballasting profile because they load and unload at significantly different rates,” says Peter Sahlén, Head of Alfa Laval PureBallast. “The PureBallast 3 bulker-fit configurati
Read more

How gasketed plate heat exchangers work

Image
In a gasketed plate heat exchanger, the plates are fitted with elastomeric gaskets which seal the channels and direct the fluids into alternate channels. The plate pack is assembled between a frame plate and a pressure plate, and compressed by tightening bolts fitted between these plates. The channel plates and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to the support column. The physical design of the gasketed plate heat exchanger allows easy cleaning and modification of capacity by the addition or removal of plates.   ·          Liquid/Liquid GPHE   ·          Steam heater GPHE   ·          Liquid/Liquid 2-pass GPHE     Liquid/Liquid GPHE This animation above shows the working principle of an Alfa Laval liquid/liquid 1-pass gasketed plate-and-frame heat exchanger where the fluids run counter-currently through the heat exchanger. The hot liquid (illustrated in red) normally enters through one of
Read more